Unable to find what you’re looking for? Call us at +31 (0) 345 651937!
Female UNC 6-32 hexagonal threaded snap lock PCB support. Bayonet top fits 4 mm panel hole. Spacer length is 15.9 mm.
Female M3 hexagonal threaded snap lock PCB support. Bayonet top fits 4 mm panel hole. Spacer length is 6 mm.
Snap lock hexagonal rest support spacer with a bayonet snap lock for a 4.2 mm mounting hole. Spacer length is 8.5 mm.
Arrowhead push spacer rest support provided with tension wing for 4.5 mm chassis. Spacer length is 11 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole. Spacer length is 16 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole. Spacer length is 8.5 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole. Spacer length is 7.7 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole. Spacer length is 7 mm.
Snap fit rest mount spacer with tension wing for a 4 mm panel hole. Spacer length is 3.6 mm.
Snap lock for a 4 mm panel hole and a key slot locking at the chassis side. Spacer length is 2.3 mm.
Snap lock with friction pin for easy assembly. Fits a mounting hole of 5.5 x 7.1 mm. Spacer length is 10 mm.
Counter sunk spacer for a 4.34 mm mounting hole provided with an arrowhead for a bottom hole of 3.0 to 3.18 mm. Spacer length is 4 mm.
Conductive dual locking support post, arrowhead fix for a top hole of 4 mm and arrowhead fix with tension wing for 4.8 mm bottom hole. Spacer length is 14.4 mm.
Support post for a panel top and bottom hole of 4 mm with a two prong snap lock. Spacer length is 16.5 mm.
This series fits a panel top hole of 3.3 mm and a PCB bottom hole with a two prong snap lock. Spacer length is 4.5 mm.
This series fits a panel top hole of 3.2 mm and a PCB bottom hole with a two prong snap lock. Spacer length is 3.2 mm.
This series fits a panel top hole of 3.2 mm and a PCB bottom hole with a two prong snap lock. Spacer length is 3 mm.
PCB support for 3.3 mm top and a 3.3 mm bottom hole. Firmly secured with removable locking pin (included). Spacer length 12 mm.
Dual locking support post. Snap lock teardrop design allows fixation into small holes. Top and bottom hole 3.2 mm. Spacer length 24 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 25.4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 22.2 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 19.1 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 17.2 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 15.9 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 15 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 14.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 14.2 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 12.7 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 12 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 11.1 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 9.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 9.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 7.9 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 7.4 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 30 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 29 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 28 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 27 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 26 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 25.4 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 25 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 24 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 23 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 22 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 21 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 20 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 19 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 18 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 17 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 16 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 15.9 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 15 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 14 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 13 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 12.7 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 12 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 11 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 10 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 9 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 8 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 7 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 6.3 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 6 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 5 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 4 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 3 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3.5 screw for a quick and easy assembly. Spacer length is 2 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 30 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 29 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 28 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 27 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 26 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 25.4 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 24 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 23 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 22 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 21 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 20 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 19 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 18 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 17 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 16 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 15.9 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 15 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 14 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 13 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 12.7 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 12 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 11.5 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 11 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 10 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 9.5 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 9 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 8 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 6.3 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 6 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 5 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 4 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 3.5 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 3 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M3 screw for a quick and easy assembly. Spacer length is 2 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 25.4 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 30 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 29 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 28 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 27 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 26 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 25 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 24 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 23 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 22 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 21 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 20 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 19 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 18 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 17 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 16 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 15.9 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 15 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 14 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 13 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 12.7 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 12 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 11 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 10 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 9.5 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 9 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 8 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 7 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 6.3 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 6 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 5 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 4 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 3 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the 4-4 UNC screw for a quick and easy assembly. Spacer length is 2 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 30 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 29 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 28 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 27 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 26 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 25.4 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 25 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 24 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 23 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 22 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 21 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 20 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 19 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 18 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 17 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 16 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 15.9 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 15 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 14 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 13 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 12.7 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 12 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 11 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 10 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 9 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 8 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 7 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 6.3 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 6 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 5 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 4 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 3 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw, for quick and easy assembly. Spacer length is 2 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 9.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 8 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5.4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 8 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 2 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 7 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 7 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6.4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4.8 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3.2 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 1.57 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 30 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 29 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 28 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 27 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 26 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 25.4 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 25 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 24 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 23 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 22 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 21 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 3 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 20 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 19 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 18 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 17 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 16 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 15.9 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 15 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 14 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 13 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 12.7 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 12 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 11.5 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 11 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 10 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 9.5 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 9 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 8 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 7 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 6.3 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 6 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 5 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 4 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 3.5 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M2 screw for quick and easy assembly. Spacer length is 2 mm.
Nylon retaining spacers are similar to the non-threaded spacers, but with a specially configured ID designed to grip the screw shank. This spacer remains attached to the M4 screw for quick and easy assembly. Spacer length is 9.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 15.9 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 30 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 25.4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 22.2 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 19.1 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 17 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 15.9 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 12.7 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 12 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 11.1 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 9.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 7.9 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6.4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4.6 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 4 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 3 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 12.7 mm.
This spacer nut fits into a squared panel hole of 4.5 x 4.5 mm and expands when a self-tapping crew of 2.9 mm is installed. Spacer length is 19.1 mm.
This spacer nut fits into a squared panel hole of 4.5 x 4.5 mm and expands when a self-tapping crew of 2.9 mm is installed. Spacer length is 15.9 mm.
This spacer nut fits into a squared panel hole of 4.5 x 4.5 mm and expands when a self-tapping crew of 2.9 mm is installed. Spacer length is 12.7 mm.
This spacer nut fits into a squared panel hole of 4.5 x 4.5 mm and expands when a self-tapping crew of 2.9 mm is installed. Spacer length is 10 mm.
This spacer nut fits into a squared panel hole of 4.5 x 4.5 mm and expands when a self-tapping crew of 2.9 mm is installed. Spacer length is 8 mm.
This spacer nut fits into a squared panel hole of 4.5 x 4.5 mm and expands when a self-tapping crew of 2.9 mm is installed. Spacer length is 6.5 mm.
This spacer nut fits into a squared panel hole of 4.5 x 4.5 mm and expands when a self-tapping crew of 2.9 mm is installed. Spacer length is 6.3 mm.
This spacer nut fits into a squared panel hole of 4.5 x 4.5 mm and expands when a self-tapping crew of 2.9 mm is installed. Spacer length is 4.8 mm.
This spacer nut fits into a squared panel hole of 4.5 x 4.5 mm and expands when a self-tapping crew of 2.9 mm is installed. Spacer length is 4.6 mm.
This spacer nut fits into a squared panel hole of 4.5 x 4.5 mm and expands when a self-tapping crew of 2.9 mm is installed. Spacer length is 3.6 mm.
This spacer nut fits into a squared panel hole of 4.5 x 4.5 mm and expands when a self-tapping crew of 2.9 mm is installed. Spacer length is 3.4 mm.
This spacer nut fits into a squared panel hole of 4.5 x 4.5 mm and expands when a self-tapping crew of 2.9 mm is installed. Spacer length is 3.2 mm.
This spacer nut fits into a squared panel hole of 4.5 x 4.5 mm and expands when a self-tapping crew of 2.9 mm is installed. Spacer length is 3.2 mm.
This spacer nut fits into a squared panel hole of 4.5 x 4.5 mm and expands when a self-tapping crew of 2.9 mm is installed. Spacer length is 3.2 mm.
This spacer nut fits into a squared panel hole of 4.5 x 4.5 mm and expands when a self-tapping crew of 2.9 mm is installed. Spacer length is 3 mm.
This spacer nut fits into a squared panel hole of 4.5 x 4.5 mm and expands when a self-tapping crew of 2.9 mm is installed. Spacer length is 3 mm.
This spacer nut fits into a squared panel hole of 4.5 x 4.5 mm and expands when a self-tapping crew of 2.9 mm is installed. Spacer length is 3.5 mm.
This self retaining screw grommet fits into a squared panel hole and expands when a self-threading screw is installed. Insulates areas of assembly from electrical and thermal transfer and spreads load over a wide area. Spacer length is 2 mm.
This self retaining screw grommet fits into a squared panel hole and expands when a self-threading screw is installed. Insulates areas of assembly from electrical and thermal transfer and spreads load over a wide area. Spacer length is 7.6 mm.
This self retaining screw grommet fits into a squared panel hole and expands when a self-threading screw is installed. Insulates areas of assembly from electrical and thermal transfer and spreads load over a wide area. Spacer length is 1.3 mm.
Arrowhead push spacer rest support provided with tension wing for 4 mm chassis. Spacer length is 9.5 mm.
Arrowhead push spacer rest support provided with tension wing for 4 mm chassis. Spacer length is 8.9 mm.
Arrowhead push spacer rest support provided with tension wing for 4 mm chassis. Spacer length is 8.9 mm.
Arrowhead push spacer rest support provided with tension wing for 4 mm chassis. Spacer length is 74 mm.
Arrowhead push spacer rest support provided with tension wing for 4 mm chassis. Spacer length is 14 mm.
Arrowhead push spacer rest support provided with tension wing for 4 mm chassis. Spacer length is 11 mm.
Arrowhead push spacer rest support provided with tension wing for 4 mm chassis. Spacer length is 10 mm.
Arrowhead push spacer rest support provided with tension wing for 4 mm chassis. Spacer length is 8 mm.
Arrowhead push spacer rest support provided with tension wing for 4 mm chassis. Spacer length is 6.4 mm.
Snap fit spacer with tension wing for a 4.5 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 19 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.6 mm for an M3 self tapping screw. Spacer length is 18.2 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 38.5 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 35 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 30 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 26 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 25 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 24.5 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 20 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 15 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 12.5 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 10 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 9.5 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 7 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 6.35 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 6 mm.
Snap fit spacer with tension wing for a 4 mm panel hole equipped at the chassis side with a pilot hole of 2.5 mm for an M3 self tapping screw. Spacer length is 5 mm.
Self retaining spacer with support base providing the desired spacing between the chassis and the PCB. Spacer length is 4.7 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6.3 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 15.9 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 12.7 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 9.5 mm.
Self retaining spacers are used to insulate the heads of screws on a printed circuit board, while providing the desired spacing between the chassis and the PCB. Spacer length is 6.3 mm.
Cushion snap lock push spacer rest support for a 3 mm chassis hole. Also available with 3M tape on rest support. Spacer length is 10.5 mm.
Cushion snap lock push spacer rest support for a 3 mm chassis hole. Also available with 3M tape on rest support. Spacer length is 10 mm.
Cushion snap lock push spacer rest support for a 3 mm chassis hole. Also available with 3M tape on rest support. Spacer length is 8 mm.
Snap lock arrowhead with tension wing spacer rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 31.5 mm.
Snap lock arrowhead with tension wing spacer rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 29.5 mm.
Snap lock bayonet nose spacer rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 25.4 mm.
Snap lock bayonet nose spacer rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 22.2 mm.
Snap lock bayonet nose spacer rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 19.1 mm.
Snap lock bayonet nose spacer rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 15.9 mm.
Snap lock bayonet nose spacer rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 12.7 mm.
Snap lock bayonet nose spacer rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 11.1 mm.
Snap lock bayonet nose spacer rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 9.5 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.95 mm and a removable snap lock for a 4 mm mounting hole. Spacer length is 9.5 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.5 mm and a bayonet snap lock for a 4 mm mounting hole. Spacer length is 6 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.9 mm and a bayonet snap lock for a 4 mm mounting hole. Spacer length is 20 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.9 mm and a bayonet snap lock for a 4 mm mounting hole. Spacer length is 15 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.9 mm and a bayonet snap lock for a 4 mm mounting hole. Spacer length is 10 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.9 mm and a bayonet snap lock for a 4 mm mounting hole. Spacer length is 8 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.9 mm and a bayonet snap lock for a 4 mm mounting hole. Spacer length is 29 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.9 mm and a bayonet snap lock for a 4 mm mounting hole. Spacer length is 28.6 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.9 mm and a bayonet snap lock for a 4 mm mounting hole. Spacer length is 25.4 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.9 mm and a bayonet snap lock for a 4 mm mounting hole. Spacer length is 22.2 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.9 mm and a bayonet snap lock for a 4 mm mounting hole. Spacer length is 19.1 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.9 mm and a bayonet snap lock for a 4 mm mounting hole. Spacer length is 15.9 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.9 mm and a bayonet snap lock for a 4 mm mounting hole. Spacer length is 14 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.9 mm and a bayonet snap lock for a 4 mm mounting hole. Spacer length is 12.7 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.9 mm and a bayonet snap lock for a 4 mm mounting hole. Spacer length is 9.5 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.9 mm and a bayonet snap lock for a 4 mm mounting hole. Spacer length is 6.4 mm.
Arrowhead push spacer rest support provided with tension wing for 3.5 mm chassis hole. Spacer length is 17 mm.
Dual locking support post. Bayonet snap fit for top hole of 4 mm and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 6.4 mm.
Arrowhead dual locking support post with tension wings. For top and bottom hole of 3 mm. Spacer length is 10.6 mm.
Dual snap lock support. Fits a top hole of 3.3 mm with a two prong snap fit and a 4.8 by 3.2 mm bottom hole with a two prong snap lock. Spacer length is 7.9 mm.
Dual locking support post. Snap lock teardrop design allows fixation into small holes. Top hole 2 mm. Bottom hole 2 mm. Length 8 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2.5 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 14 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2.5 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 10 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2.5 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2.5 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 6 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 16 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 14 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 12.7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 12 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 10 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 9 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 8 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 6 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Teardrop snap fit for panel hole of 2 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 4 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 23 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Arrowhead fits panel hole of 3 mm. Snap in fixation for chassis hole diameter of 4 mm. Spacer length 15.5 mm.
Threaded 6-32 UNC PCB support rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 25.4 mm.
Threaded 6-32 UNC PCB support rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 22.2 mm.
Threaded 6-32 UNC PCB support rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 19.1 mm.
Threaded 6-32 UNC PCB support rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 15.9 mm.
Threaded 6-32 UNC PCB support rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 12.7 mm.
Threaded 6-32 UNC PCB support rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 11.1 mm.
Threaded 6-32 UNC PCB support rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 9.5 mm.
Threaded M4 PCB support rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 25.4 mm.
Threaded M4 PCB support rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 22.2 mm.
Threaded M4 PCB support rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 19.1 mm.
Threaded M4 PCB support rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 15.9 mm.
Threaded M4 PCB support rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 12.7 mm.
Threaded M4 PCB support rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 11.1 mm.
Threaded M4 PCB support rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 9.5 mm.
Threaded M3 PCB support rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 25.4 mm.
Threaded M3 PCB support rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 22.2 mm.
Threaded M3 PCB support rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 19.1 mm.
Threaded M3 PCB support rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 15.9 mm.
Threaded M3 PCB support rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 12.7 mm.
Threaded M3 PCB support rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 11.1 mm.
Threaded M3 PCB support rivet mount. To be used with our SR4 snap rivet series (sold separately). Spacer length is 9.5 mm.
Female 6-32 UNC threaded snap lock PCB support. Snap fit top fits 4 mm panel hole. Spacer length is 25.4 mm.
Female 6-32 UNC threaded snap lock PCB support. Snap fit top fits 4 mm panel hole. Spacer length is 22.2 mm.
Female 6-32 UNC threaded snap lock PCB support. Snap fit top fits 4 mm panel hole. Spacer length is 19.1 mm.
Female 6-32 UNC threaded snap lock PCB support. Snap fit top fits 4 mm panel hole. Spacer length is 15.9 mm.
Female 6-32 UNC threaded snap lock PCB support. Snap fit top fits 4 mm panel hole. Spacer length is 12.7 mm.
Female 6-32 UNC threaded snap lock PCB support. Snap fit top fits 4 mm panel hole. Spacer length is 9.5 mm.
Female M3 hexagonal threaded snap lock PCB support. Bayonet top fits 4 mm panel hole. Spacer length is 10 mm.
Female M3 hexagonal threaded snap lock PCB support. Bayonet top fits 4 mm panel hole. Spacer length is 8 mm.
Female M3 hexagonal threaded snap lock PCB support. Bayonet top fits 4 mm panel hole. Spacer length is 20 mm.
Female M3 hexagonal threaded snap lock PCB support. Bayonet top fits 4 mm panel hole. Spacer length is 15 mm.
Female M3 hexagonal threaded snap lock PCB support. Bayonet top fits 4 mm panel hole. Spacer length is 12 mm.
Female M3 hexagonal threaded snap lock PCB support. Bayonet top fits 4 mm panel hole. Spacer length is 10 mm.
Female 6-32 UNC threaded snap lock PCB support. Bayonet top fits 4 mm panel hole. Spacer length is 25.4 mm.
Female 6-32 UNC threaded snap lock PCB support. Bayonet top fits 4 mm panel hole. Spacer length is 22.2 mm.
Female 6-32 UNC threaded snap lock PCB support. Bayonet top fits 4 mm panel hole. Spacer length is 19.1 mm.
Female 6-32 UNC threaded snap lock PCB support. Bayonet top fits 4 mm panel hole. Spacer length is 15.9 mm.
Female 6-32 UNC threaded snap lock PCB support. Bayonet top fits 4 mm panel hole. Spacer length is 12.7 mm.
Female 6-32 UNC threaded snap lock PCB support. Bayonet top fits 4 mm panel hole. Spacer length is 9.5 mm.
Female M4 threaded snap lock PCB support. Bayonet top fits 4 mm panel hole. Spacer length is 25.4 mm.
Female M4 threaded snap lock PCB support. Bayonet top fits 4 mm panel hole. Spacer length is 22.2 mm.
Female M4 threaded snap lock PCB support. Bayonet top fits 4 mm panel hole. Spacer length is 19.1 mm.
Female M4 threaded snap lock PCB support. Bayonet top fits 4 mm panel hole. Spacer length is 15.9 mm.
Female M4 threaded snap lock PCB support. Bayonet top fits 4 mm panel hole. Spacer length is 12.7 mm.
Female M4 threaded snap lock PCB support. Bayonet top fits 4 mm panel hole. Spacer length is 9.5 mm.
This blind hole circuit board spacer will press-fit into a 7.9 mm round threaded, punched or drilled hole. The bayonet head fit a 4 mm hole. Spacer length is 25.4 mm.
This blind hole circuit board spacer will press-fit into a 7.9 mm round threaded, punched or drilled hole. The bayonet head fit a 4 mm hole. Spacer length is 22.2 mm.
This blind hole circuit board spacer will press-fit into a 7.9 mm round threaded, punched or drilled hole. The bayonet head fit a 4 mm hole. Spacer length is 19.1 mm.
This blind hole circuit board spacer will press-fit into a 7.9 mm round threaded, punched or drilled hole. The bayonet head fit a 4 mm hole. Spacer length is 15.9 mm.
This blind hole circuit board spacer will press-fit into a 7.9 mm round threaded, punched or drilled hole. The bayonet head fit a 4 mm hole. Spacer length is 12.7 mm.
This blind hole circuit board spacer will press-fit into a 7.9 mm round threaded, punched or drilled hole. The bayonet head fit a 4 mm hole. Spacer length is 11.1 mm.
This blind hole circuit board spacer will press-fit into a 7.9 mm round threaded, punched or drilled hole. The bayonet head fit a 4 mm hole. Spacer length is 9.5 mm.
This blind hole circuit board spacer will press-fit into a 7.9 mm round threaded, punched or drilled hole. The bayonet head fit a 4 mm hole. Spacer length is 6.4 mm.
This blind hole circuit board spacer will press-fit into a 7.9 mm round threaded, punched or drilled hole. The bayonet head fit a 4 mm hole. Spacer length is 4.8 mm.
Double ended Christmas tree spacer allows to secure board, or soft sheet materials such as rubber to secondary panels. Also used for holding components onto panels. Spacer length is 1.8 mm.
This blind hole circuit board spacer will press-fit into a 7.9 mm round threaded, punched or drilled holes. The winged arrowhead fits a 4 mm hole. Spacer length is 6.4 mm.
Snap lock winged arrowhead for a 4.5~4.8 mm panel hole and a key slot locking at the chassis side. Spacer length is 8.6 mm.
Snap lock winged arrowhead for a 4.5 mm panel hole and a key slot locking at the chassis side. Spacer length is 11 mm.
Snap lock arrowhead for a 4 mm panel hole and a key slot locking at the chassis side. Spacer length is 6.35 mm.
Snap lock for a 4 mm panel hole and a key slot locking at the chassis side. Spacer length is 74 mm.
Snap lock for a 4 mm panel hole and a key slot locking at the chassis side. Spacer length is 68 mm.
Snap lock for a 4 mm panel hole and a key slot locking at the chassis side. Spacer length is 60 mm.
Snap lock for a 4 mm panel hole and a key slot locking at the chassis side. Spacer length is 8 mm.
Snap lock for a 4 mm panel hole and a key slot locking at the chassis side. Spacer length is 6.3 mm.
Snap lock for a 4 mm panel hole and a key slot locking at the chassis side. Spacer length is 5 mm.
Snap lock for a 4 mm panel hole and a key slot locking at the chassis side. Spacer length is 3.2 mm.
Snap lock for a 4 mm panel hole and a key slot locking at the chassis side. Spacer length is 2.5 mm.
Snap lock spacer with bayonet nose for a 4 mm panel hole and a key slot locking at the chassis side. Spacer length is 6.4 mm.
Snap lock M3 spacer with arrowhead for a mounting hole of 5.5 x 7.1 mm. Spacer length is 6.35 mm.
Snap lock M3 spacer with arrowhead for a mounting hole of 5.5 x 7.1 mm. Spacer length is 25.4 mm.
Snap lock M3 spacer with arrowhead for a mounting hole of 5.5 x 7.1 mm. Spacer length is 22 mm.
Snap lock M3 spacer with arrowhead for a mounting hole of 5.5 x 7.1 mm. Spacer length is 20 mm.
Snap lock M3 spacer with arrowhead for a mounting hole of 5.5 x 7.1 mm. Spacer length is 18 mm.
Snap lock M3 spacer with arrowhead for a mounting hole of 5.5 x 7.1 mm. Spacer length is 15.9 mm.
Snap lock M3 spacer with arrowhead for a mounting hole of 5.5 x 7.1 mm. Spacer length is 12.7 mm.
Snap lock M3 spacer with arrowhead for a mounting hole of 5.5 x 7.1 mm. Spacer length is 12 mm.
Snap lock M3 spacer with arrowhead for a mounting hole of 5.5 x 7.1 mm. Spacer length is 10 mm.
Snap lock M3 spacer with arrowhead for a mounting hole of 5.5 x 7.1 mm. Spacer length is 9.5 mm.
Snap lock M3 spacer with arrowhead for a mounting hole of 5.5 x 7.1 mm. Spacer length is 8 mm.
Snap lock M3 spacer with arrowhead for a mounting hole of 5.5 x 7.1 mm. Spacer length is 6 mm.
Snap lock M3 spacer with arrowhead for a mounting hole of 5.5 x 7.1 mm. Spacer length is 5 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 15 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 13 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 12 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 11 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 9 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 8.5 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 8 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 7 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 5.5 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 5 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 4.5 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 4 mm.
Snap lock M4 spacer with arrowhead for a mounting hole of 5.5 x 7.1 mm. Spacer length is 10 mm.
Snap lock spacer with a pilot hole of 2.4 mm and an arrowhead for an elongated chassis hole of 4.8 x 3.2 mm. Spacer length is 12 mm.
Self tapping rest support with a pilot hole of 2.1 mm and an arrowhead for a 4 mm mounting hole. Spacer length is 12.7 mm.
Self tapping rest support with a pilot hole of 2.1 mm and an arrowhead for a 4 mm mounting hole. Spacer length is 9.7 mm.
Self tapping rest support with a pilot hole of 2.1 mm and an arrowhead for a 4 mm mounting hole. Spacer length is 6.35 mm.
Snap lock spacer with a pilot hole of 1.6 mm and an arrowhead with tension wing with an anti-rotation provision for the chassishole. Spacer length is 13.7 mm.
Snap lock spacer with a pilot hole of 1.6 mm and an arrowhead with tension wing with an anti-rotation provision for the chassishole. Spacer length is 8.7 mm.
Snap lock spacer provided with a pilot hole of 2.5 mm an arrowhead with tension wings for a 4.8~5 mm mounting hole. Spacer length is 4.8 mm.
Snap lock spacer with a pilot hole of 1.66 mm and an arrowhead with tension wings for a chassishole of 4 mm. Spacer length is 13.7 mm.
Snap lock spacer with a pilot hole of 1.66 mm and an arrowhead with tension wings for a chassishole of 4 mm. Spacer length is 8.7 mm.
This blind hole circuit board spacer will press-fit into a 6 mm round threaded, punched or drilled holes. The arrowhead fits a 4 mm hole. Spacer length is 6.8 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 3.5 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 3 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 2 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 15 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 15 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 15 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 10 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 8 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 8 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 7 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 6.5 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 6 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 5.8 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 5 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 4 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 3.5 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 3 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 2.5 mm.
Rest support with extra base and shoulder provided with an arrowhead for a 3 mm mounting hole. Spacer length is 2 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 1.8 mm and an arrowhead for a rectangular mounting hole of 3 x 2 mm. Spacer length is 7.2 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.4 mm and an arrowhead for a 4 mm mounting hole. Spacer length is 4.7 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length is 4.8 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length is 20 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length is 15.9 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length is 15 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length is 14 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length is 12.7 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length is 11 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length is 10 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length is 9 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length is 8 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length is 7 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length is 6 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length is 5 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length is 20 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length is 15.9 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length is 15 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length is 14 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length is 12.7 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length is 11 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length is 10 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length is 9 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length is 8 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length is 7 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length is 6 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length is 5 mm.
Rest support with extra base and shoulder provided with arrowhead for a 3.5 mm mounting hole. Spacer length is 6 mm.
Rest support with extra base and shoulder provided with arrowhead for a 3.5 mm mounting hole. Spacer length is 26 mm.
Rest support with extra base and shoulder provided with arrowhead for a 3.5 mm mounting hole. Spacer length is 13.5 mm.
Rest support with extra base and shoulder provided with arrowhead for a 3.5 mm mounting hole. Spacer length is 13 mm.
Rest support with extra base and shoulder provided with arrowhead for a 3.5 mm mounting hole. Spacer length is 7 mm.
Rest support with extra base and shoulder provided with arrowhead for a 3.5 mm mounting hole. Spacer length is 6.5 mm.
Rest support with extra base and shoulder provided with arrowhead for a 3.5 mm mounting hole. Spacer length is 5.5 mm.
Rest support with extra base and shoulder provided with arrowhead for a 3.5 mm mounting hole. Spacer length is 10 mm.
Rest support with extra base and shoulder provided with arrowhead for a 3.5 mm mounting hole. Spacer length is 9 mm.
Rest support with extra base and shoulder provided with arrowhead for a 3.5 mm mounting hole. Spacer length is 5 mm.
Rest support provided with a snap lock for a 2 mm mounting hole. Spacer length is 3.85 mm.
Dual locking support post. Snap lock for top hole of 4 mm and a two prong snap lock for 5.4 mm chassis hole. Spacer length is 9.7 mm.
Dual locking support post. Snap lock for top hole of 4 mm and a two prong snap lock for 5.4 mm chassis hole. Spacer length is 9.7 mm.
Dual locking support post. Snap lock for top hole of 4 mm and a two prong snap lock with tension wing for 4.8 mm chassis hole. Spacer length is 22.2 mm.
Dual locking support post. Snap lock for top hole of 4 mm and a two prong snap lock with tension wing for 4.8 mm chassis hole. Spacer length is 19.1 mm.
Dual locking support post. Snap lock for top hole of 4 mm and a two prong snap lock with tension wing for 4.8 mm chassis hole. Spacer length is 15.9 mm.
Dual locking support post. Snap lock for top hole of 4 mm and a two prong snap lock with tension wing for 4.8 mm chassis hole. Spacer length is 12.7 mm.
Dual locking support post. Snap lock for top hole of 4 mm and a two prong snap lock with tension wing for 4.8 mm chassis hole. Spacer length is 9.5 mm.
Dual locking support post. Snap lock for top hole of 4 mm and a two prong snap lock with tension wing for 4.8 mm chassis hole. Spacer length is 6.4 mm.
Dual locking support post. Snap lock for top hole of 3.8 mm and a two prong snap lock with tension wing for 4.8 mm chassis hole. Spacer length is 4.8 mm.
Dual locking support post. Snap lock for top hole of 4 mm and a two prong snap lock with tension wing for 4.8 mm chassis hole. Spacer length is 4.8 mm.
Dual locking support post. Snap lock for top hole of 4 mm and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 4.8 mm.
Snap lock hexagonal M4 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length 20 mm.
Snap lock hexagonal M4 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length 15.9 mm.
Snap lock hexagonal M4 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length 15 mm.
Snap lock hexagonal M4 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length 14 mm.
Snap lock hexagonal M4 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length 12.7 mm.
Snap lock hexagonal M4 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length 11 mm.
Snap lock hexagonal M4 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length 10 mm.
Snap lock hexagonal M4 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length 9 mm.
Snap lock hexagonal M4 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length 8 mm.
Snap lock hexagonal M4 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length 7 mm.
Snap lock hexagonal M4 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length 6 mm.
Snap lock hexagonal M4 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length 5 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 3.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length 20 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 3.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length 15.9 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 3.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length 15 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 3.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length 14 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 3.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length 12.7 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 3.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length 11 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 3.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length 10 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 3.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length 9 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 3.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length 8 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 3.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length 7 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 3.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length 6 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 3.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length 5 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 4 mm mounting hole. Spacer length 6 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 4 mm mounting hole. Spacer length 6 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 3 mm mounting hole. Spacer length 7 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.35 mm and an arrowhead for a 3 mm mounting hole. Spacer length 7 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 3 mm mounting hole. Spacer length 27 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 3 mm mounting hole. Spacer length 26.5 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 3 mm mounting hole. Spacer length 26 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 3 mm mounting hole. Spacer length 23.5 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 3 mm mounting hole. Spacer length 22 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 3 mm mounting hole. Spacer length 20 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 3 mm mounting hole. Spacer length 19 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 3 mm mounting hole. Spacer length 18 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 3 mm mounting hole. Spacer length 17 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 3 mm mounting hole. Spacer length 16 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 3 mm mounting hole. Spacer length 15 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 3 mm mounting hole. Spacer length 14 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 3 mm mounting hole. Spacer length 13 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 3 mm mounting hole. Spacer length 12 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 3 mm mounting hole. Spacer length 11 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 3 mm mounting hole. Spacer length 10 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 3 mm mounting hole. Spacer length 9 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 3 mm mounting hole. Spacer length 8 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 3 mm mounting hole. Spacer length 7 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 3 mm mounting hole. Spacer length 6 mm.
Snap lock hexagonal M3 spacer provided with an arrowhead for a 3 mm mounting hole. Spacer length 5 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 3 mm mounting hole. Spacer length 26 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 3 mm mounting hole. Spacer length 23.5 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 3 mm mounting hole. Spacer length 22 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 3 mm mounting hole. Spacer length 20 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 3 mm mounting hole. Spacer length 19 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 3 mm mounting hole. Spacer length 18 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 3 mm mounting hole. Spacer length 17 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 3 mm mounting hole. Spacer length 16 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 3 mm mounting hole. Spacer length 15 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 3 mm mounting hole. Spacer length 14 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 3 mm mounting hole. Spacer length 13 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 3 mm mounting hole. Spacer length 12 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 3 mm mounting hole. Spacer length 11 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 3 mm mounting hole. Spacer length 10 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 3 mm mounting hole. Spacer length 9 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 3 mm mounting hole. Spacer length 8 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 3 mm mounting hole. Spacer length 7 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 3 mm mounting hole. Spacer length 6 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 2.7 mm and an arrowhead for a 3 mm mounting hole. Spacer length 5 mm.
Snap lock hexagonal M2 spacer provided with an arrowhead for a 2.5 mm mounting hole. Spacer length 6.5 mm.
Snap lock hexagonal self tapping spacer with a pilot hole of 1.7 mm and an arrowhead for a 2.5 mm mounting hole. Spacer length 6.5 mm.
Rest support provided with a two prong snap lock for a 3.9 mm mounting hole. Spacer length 3.5 mm.
Rest support provided with a two prong snap lock for a 2.5 mm mounting hole. Spacer length 2.5 mm.
Rest support provided with a two prong snap lock for a 2.3 mm mounting hole. Spacer length 2.8 mm.
Rest support provided with pilot hole of 4 mm for a self-tapping screw provided with a two prong snap lock for a 2.2 mm mounting hole. Spacer length 25.4 mm.
Rest support provided with a two prong snap lock for a 2 mm mounting hole. Spacer length 10 mm.
Rest support provided with a flat nose snap fit for a 2 mm mounting hole. Spacer length 18.8 mm.
Rest support provided with a flat nose snap fit for a 2 mm mounting hole. Spacer length 6 mm.
Push spacer rest support provided with a two prong snap lock for a 3 mm mounting hole. Spacer length 24.3 mm.
Push spacer rest support provided with a two prong snap lock for a 3 mm mounting hole. Spacer length 14.1 mm.
Arrowhead push spacer rest support provided with tension wing for 4 mm chassis hole. Spacer length 18 mm.
Arrowhead push spacer rest support provided with tension wing for 4.8~5 mm chassis hole. Spacer length is 9.5 mm.
Arrowhead push spacer rest support provided with tension wing for 4.8 mm chassis hole. Spacer length is 34.9 mm.
Arrowhead push spacer rest support provided with tension wing for 4.8 mm chassis hole. Spacer length is 31.7 mm.
Arrowhead push spacer rest support provided with tension wing for 4.8 mm chassis hole. Spacer length is 31.1 mm.
Arrowhead push spacer rest support provided with tension wing for 4.8 mm chassis hole. Spacer length is 28.6 mm.
Arrowhead push spacer rest support provided with tension wing for 4.8 mm chassis hole. Spacer length is 27.5 mm.
Arrowhead push spacer rest support provided with tension wing for 4.8 mm chassis hole. Spacer length is 25.4 mm.
Arrowhead push spacer rest support provided with tension wing for 4.8 mm chassis hole. Spacer length is 24 mm.
Arrowhead push spacer rest support provided with tension wing for 4.8 mm chassis hole. Spacer length is 22.2 mm.
Arrowhead push spacer rest support provided with tension wing for 4.8 mm chassis hole. Spacer length is 19.1 mm.
Arrowhead push spacer rest support provided with tension wing for 4.8 mm chassis hole. Spacer length is 15.9 mm.
Arrowhead push spacer rest support provided with tension wing for 4.8 mm chassis hole. Spacer length is 12.7 mm.
Arrowhead push spacer rest support provided with tension wing for 4.8 mm chassis hole. Spacer length is 11.1 mm.
Arrowhead push spacer rest support provided with tension wing for 4.8 mm chassis hole. Spacer length is 9.5 mm.
Arrowhead push spacer rest support provided with tension wing for 4.8 mm chassis hole. Spacer length is 7.9 mm.
Arrowhead push spacer rest support provided with tension wing for 4.8 mm chassis hole. Spacer length is 6.4 mm.
Arrowhead push spacer rest support provided with tension wing for 4.8 mm chassis hole. Spacer length is 6 mm.
Arrowhead push spacer rest support provided with tension wing for 4.8 mm chassis hole. Spacer length is 4.8 mm.
Arrowhead push spacer rest support provided with tension wing for 4.8 mm chassis hole. Spacer length is 3.5 mm.
Arrowhead push spacer rest support provided with tension wing for 3.5 mm chassis hole. Spacer length is 22 mm.
Arrowhead push spacer rest support provided with tension wing for 3.5 mm chassis hole. Spacer length is 18 mm.
Arrowhead push spacer rest support provided with tension wing for 3.5 mm chassis hole. Spacer length is 12 mm.
Arrowhead push spacer rest support provided with tension wing for 3.5 mm chassis hole. Spacer length is 7 mm.
Arrowhead push spacer rest support provided with tension wing for 3.5 mm chassis hole. Spacer length is 4.5 mm.
Dual lock support post. Bayonet snap fit for a top and bottom hole of 4 mm. Spacer length is 15 mm.
Dual lock support post. Releasable snap lock for a top hole of 3.3 mm and an arrowhead fix for a chassis hole of 3.3 mm. Spacer length is 28.8 mm.
Dual lock support post. Bayonet snap fit for a top hole of 3.5 mm and a teardrop design for a chassis hole of 2.6 mm. Spacer length is 11 mm.
Dual lock support post. Bayonet snap fit for a top hole of 3.2 mm and a teardrop design for a chassis hole of 2 mm. Spacer length is 6.4 mm.
Dual lock support post. Bayonet snap fit for a top hole of 3.2 mm and a two prong lock design for a chassis hole of 3.2 mm. Spacer length is 15.9 mm.
Dual lock support post. Bayonet snap fit for a top hole of 3.2 mm and a two prong lock design for a chassis hole of 3.2 mm. Spacer length is 7.9 mm.
Dual lock support post. Bayonet snap fit for a top hole of 3.2 mm and a two prong lock design for a chassis hole of 3.2 mm. Spacer length is 4 mm.
Dual lock support post. Bayonet snap fit for a top hole of 3 mm and a two prong lock design for a chassis hole of 3 mm. Spacer length is 6 mm.
Support post with a releasable two prong design for a top hole of 2.8 mm and an arrowhead fixation for a bottom hole of 2.8 mm. Spacer length is 6.3 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 9 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 8 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 6.75 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 6.5 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 6 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 5.6 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 5 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 4.7 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 4.5 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 4 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 3.75 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 3.5 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 3.5 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 3.2 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 3.2 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 3 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 3 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 3 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 3 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 2.8 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 2.5 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 2.5 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 2.5 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 2 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 2 mm.
Push spacer rest support provided with a snap lock for a 2 mm mounting hole. Spacer length 1.8 mm.
Push spacer rest support provided with a snap lock for a 1.5 mm mounting hole. Spacer length 6.5 mm.
Push spacer rest support provided with a snap lock for a 1.5 mm mounting hole. Spacer length 6 mm.
Push spacer rest support provided with a snap lock for a 1.5 mm mounting hole. Spacer length 5 mm.
Push spacer rest support provided with a snap lock for a 1.5 mm mounting hole. Spacer length 4 mm.
Push spacer rest support provided with a snap lock for a 1.5 mm mounting hole. Spacer length 3.5 mm.
Push spacer rest support provided with a snap lock for a 1.5 mm mounting hole. Spacer length 3 mm.
Push spacer rest support provided with a snap lock for a 1.5 mm mounting hole. Spacer length 2.5 mm.
Push spacer rest support provided with a snap lock for a 1.5 mm mounting hole. Spacer length 2 mm.
Push spacer hexagonal rest support provided with a snap lock for a 1.5 mm mounting hole. Spacer length 2 mm.
Push spacer hexagonal rest support provided with a snap lock for a 1.5 mm mounting hole. Spacer length 0.8 mm.
Reverse mount PCB spacer. Flat design minimizes protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 12.7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6 mm. Spacer length 4.8 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6 mm. Spacer length 6.4 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6 mm. Spacer length 8 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6 mm. Spacer length 9.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6 mm. Spacer length 12.7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6 mm. Spacer length 19 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 7.9 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 12 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 12.7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 6.3 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 10 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.4 mm. Spacer length 6.4 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6.3 mm. Spacer length 7 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 3.5 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 6 mm. Spacer length 4.8 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 10 mm.
Reverse mount PCB spacer. Cupped design minimizes dust ingress and protrusion on chassis bottom. Bayonet snap fit for panel hole of 4 mm. Snap in fixation for chassis hole diameter of 5.5 mm. Spacer length 4.8 mm.
Arrowhead push spacer rest support provided with tension wing for 4.8 mm chassis. Spacer length is 12.6 mm.
Arrowhead push spacer rest support provided with tension wing for 4.8 mm chassis. Spacer length is 9.3 mm.
Arrowhead push spacer rest support provided with tension wing for 4.8 mm chassis. Spacer length is 4.6 mm.
Male threaded snap lock. M4 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 4 mm.
Male threaded snap lock. M4 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 3 mm.
Male threaded snap lock. M4 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 15 mm.
Male threaded snap lock. M4 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 14 mm.
Male threaded snap lock. M4 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 13 mm.
Male threaded snap lock. M4 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 12 mm.
Male threaded snap lock. M4 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 11 mm.
Male threaded snap lock. M4 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 10 mm.
Male threaded snap lock. M4 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 9 mm.
Male threaded snap lock. M4 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 8 mm.
Male threaded snap lock. M4 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 7 mm.
Male threaded snap lock. M4 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 6 mm.
Male threaded snap lock. M4 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 5 mm.
Male threaded snap lock. M3 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 4 mm.
Male threaded snap lock. M3 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 3 mm.
Male threaded snap lock. M3 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 15 mm.
Male threaded snap lock. M3 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 14 mm.
Male threaded snap lock. M3 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 13 mm.
Male threaded snap lock. M3 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 12 mm.
Male threaded snap lock. M3 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 11 mm.
Male threaded snap lock. M3 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 10 mm.
Male threaded snap lock. M3 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 9 mm.
Male threaded snap lock. M3 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 8 mm.
Male threaded snap lock. M3 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 7 mm.
Male threaded snap lock. M3 thread top and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 5 mm.
Dual locking support post. Arrowhead top for 4 mm panel hole and slide lock with anti rotation tension wing for 4 mm chassis hole. Spacer length is 7.6 mm.
Dual locking support post. Arrowhead top for 4 mm panel hole and slide lock with anti rotation tension wing for 4 mm chassis hole. Spacer length is 5.6 mm.
Dual locking support post. Arrowhead top for 4 mm panel hole and arrowhead with tension wing for 4.8 mm chassis hole. Spacer length is 7.9 mm.
Dual locking support post. Arrowhead top for 4 mm panel hole and releasable snap lock teardrop with tension wing for 4.8 mm chassis hole. Spacer length is 19.1 mm.
Dual locking support post. Arrowhead top for 4 mm panel hole and releasable snap lock teardrop with tension wing for 4.8 mm chassis hole. Spacer length is 15.9 mm.
Dual locking support post. Arrowhead top for 4 mm panel hole and releasable snap lock teardrop with tension wing for 4.8 mm chassis hole. Spacer length is 12.7 mm.
Dual locking support post. Arrowhead top for 4 mm panel hole and releasable snap lock teardrop with tension wing for 4.8 mm chassis hole. Spacer length is 9.5 mm.
Dual locking support post. Arrowhead top for 3.5 mm panel hole and releasable snap lock teardrop with tension wing for 4.8 mm chassis hole. Spacer length is 19.1 mm.
